Your cart is empty

Katana 3d Model with included RC petrol engine CRRC GP26



The model was Originally designed around the new CRRC Pro GF26i V2 and this engine complimented this model so well it made a superb package, however, of course, people wanted more - so the model is now sold with higher power (3.15ps vs 2.4ps) GP26R engine - this makes pull-outs from prop hang easier and more assertive.

Accessories have been as well thought out as the rest of the model. Of course you get your wheels and undercarriage but you also get all alloy and carbon pushrods which are made to measure, add to this the adjustable horns and ball joint clevices which come in the packaged accessories kit. We have even included your extension leads for both the Tail feathers and the wings, snap on connector protectors (leadlocks) so you can be sure they won't come apart, all of the cable ties you will need, pretty much everything - Just add glue, radio and batteries though if you need these too, just get in touch.

Flight performance can be extreme of course with massive movements available and loads of power from the included GP26R but throttle back and turn down the rates, as you would expect from a Fun Fly, she turns into a pussycat, with easy control and stable flight.



Wingspan: 63" 
Length: 67"
Weight: 3.8Kg
Power, CRRC GP26R Included

Radio Required: 6 servos, 4 function.

Our demo model is fitted out accordingly.

RX: R77s
Servos. MG996's on all flying surfaces, SG5010's on throttle



Why not add some MG996 Ball raced, metal geared digital servos, perfectly suited and we will do you deal on them when purchased with a plane.


Full Kit contents:

  • Katana Aircraft, fully assembled to component level and pre-covered (colour as images above)
  • LED switch for Engine power
  • 17x8 high strength low flex propellor
  • Alloy wing joiner tube.
  • Extension leads for tail feathers.
  • Extension leads for wing servos
  • All alloy and carbon pushrods for main controls. Wire pushrod for throttle.
  • Ball raced clevices for all flying controls surfaces. Grub screw wire locks for throttle.
  • Adjustable length control horns for all flying surfaces (3 bolt triangular bolthrough mounts)
  • Large output arms (not necessary with MG996r servos)
  • Cable keepers to ensure no plugs can come undone.
  • Fuel tank (petrol compatible of course).
  • Tygon fuel tube
  • Undercarriage, all wheels, collets and fixings.
  • All nuts and bolts as required.
  • All cable ties as required.

Final assembly required.

All holes are pre-cut or drilled as required final assembly involves installation of tail feathers, installation and hinging of control surfaces and installation of engine and radio control..

 Delivery on this item is 15 to 20 days.

Add to Cart:

Customers who bought this product also purchased...